Featured Products

 


Do you perform Baseline ECG's in your Home Care Agency?

"30% of patients Post-CABG experience atrial fibrillation." - Matthew, JP, ETAL., 1996

"34.6% of patients experience atrial arrhythmias post cardiac surgery, with a range of 9% - 92%"
- Crisswell, 1993

 


Specifications

Hub Weight: 280 - 300 grams depending on cable options.
Hub Dimensions: 85 x 91 x 20 mm
Patient Leads Length: 1 meter
PC Connection Length: 1-3 meter, DB9 female connector
Patient Leads: 6 Lead Cable (4 patient leads) 12 Lead Cable (10 patient leads).
Case Material: ABS plastic.
Electrode Connections: 4 mm banana plug with "tab" or "snap" connectors.
Electrode Labeling: Abbreviations and colors to comply with either IEC or AAMI standards.
Display and Operating Console: Dependent on PC (supplied by user).
Gain/Sensitivity: 5, 10, 20 mm/mV
Input Range: ±6mV
Acquisition Sample Rate: 1000 samples per second (compressed to 500Hz with peak picking and averaging algorithm).
Frequency Response: 0.05 to 175Hz ±3dB
Defibrillator Protection: Patient leads are isolated from system and operator, with 4kV protection.
Common Mode Rejection: -60dB (minimum)
Safety Standards: Complies with AAMI EC11, EN60601-1, EN601-1-2, and EN601-2-25.
Leads Off Indicators: Connection status for each lead is shown on Acquisition screen.
Power Source: Can be powered by the PC Serial port control lines in most cases, depending on the PC being used. Can draw extra power if necessary from a PS/2 or USB port.
Supply Voltage: 4 – 16V DC
Supply Current: <17mA DC
Permanent Filters: High Pass: 0.05Hz 1st order
Low Pass: 170Hz 1st order
Baseline Wander: Baseline reset by adaptive zeroing algorithm.
Notch Filter (Mains Noise Rejection): 50Hz 4th order Butterworth,
49.1Hz - 50.9Hz,
60Hz 4th order Butterworth,
59.1Hz - 60.9Hz
Low pass (Muscle Artifact Filter)
35Hz 4th order.
Report Capabilities: User selectable report formats.
Environmental Conditions: Operating Temperature 0°C - 40°C
Storage Temperature -20°C - 70°C
Humidity 5% - 85% (non-condensing)

Back to top

Universal EKG System Requirements

Minimum System Requirements for Desktop, Laptop and Tablet PCs:
 
Operating System: Microsoft® Windows® XP (Home, Pro, Tablet) or 
Vista (Business Ed.)
Free Disk Space: 300MB
Connectivity:   1 Available Serial Port, or
1 Available USB Port, or
1 Available CF Card Slot, or
1 Available Type II PC Card Slot

Minimum System Requirements for Pocket PCs:
 

Operating System:  *Pocket PC 2003 (1st or 2nd edition), or
  Windows® Mobile 5
Host Computer: A Personal Computer (PC) running Windows® 2000 or XP (required for installation)
Communication Software: Windows ActiveSync®. Refer to your Pocket PC Owner’s Manual for ActiveSync requirements.
Connectivity: 1 Available CF Card Slot, or
1 Available Type II PC Card Slot, or
1 Available Serial Port

*Note the CE.NET Operating System is not currently supported.

Back to top

 

Universal ECG™ Compatibility

The Universal ECG is designed to work with off-the-shelf Windows® Personal Computers (PCs), Laptops and Pocket PCs.
 


Incompatible PPCs:
From time-to-time we encountered a PC/PPC that is incompatible. Equipment that is currently incompatible with the Universal ECG is listed here:

  • HP iPAQ 210 running Windows Mobile 6 - users must install the sp39620 patch from the HP website before installing Pocket Medic. Without this patch the PPC will terminate the ECG test. Contact QRS Technical Support for more instructions.  


Compatible PCs (tested by QRS):
The Universal ECG works on off-the-shelf PCs and handhelds that meet the minimum system requirements.
 
The list below contains mobile devices QRS has certified and recommends.
 
  /files/Graphic Files/RECON_close-up_3.jpg TDS Recon - Windows® Mobile Device
Windows Mobile 5.0 (Premium Edition)
200 MHz or 400MHz Intel PXA255 XScale Processor
Sunlight-readable color TFT display
Rugged waterproof design
15 hours of continuous room-temperature operation with default settings
Optional integrated Bluetooth and 802.11g wireless capability
1x Type I and 1x Type II Compact Flash slots
Standard 9-pin male D-shell RS-232 serial and USB ports
 
      /files/Graphic Files/Nomad.JPG TDS Nomad - Ruggedized Windows® Mobile Device
Windows Mobile 6 (Classic edition)
Rugged submersible design
Integrated Bluetooth 2.0
CompactFlash (CF) (Type II) slot
Secure Digital (SDIO) slot
USB host and client
15 hour battery life with active use (default settings)
 
  /files/Graphic Files/Atigo_1.JPG Xybernaut Atigo S - Tablet PC
PC Card Slot (CardBus Type II), CompactFlash Type II
(CF-IO), USB 2.0 port, Built in Bluetooth
Optional Outdoor Display (high bright) system
Optional built in 802.11 b/g Mini PCI Wireless
Microsoft® Windows XP Embedded (SP2) and XP Professional (SP2)
Internal Rechargeable Lithium-Ion Battery,
optional hot-swappable clip-on battery.
  
 
  /files/Graphic Files/Motion Tablet.JPG Motion Computing 1400 Tablet PCs
Microsoft® Windows® XP Tablet PC Edition
802.11b/g card, Integrated 10/100 Ethernet LAN
controller with RJ-45 connector
Integrated Bluetooth™
Two USB 2.0 ports
One Type II PC Card slot
 
  /files/Graphic Files/Socket Pocket PC.JPG Socket Communications - SoMo 650 Pocket PC
Microsoft® Windows® Mobile 5.0
802.11g Wi-Fi 
Integrated Bluetooth™
CompactFlash Slot

Back to top

 

 

  Qualifying patients for use

  EMR Compatibility

  Specifications

  System Requirements

  QRS® FAQ's

  QRS® Literature Piece

  Testimonials

  White Papers:
  - The QT Interval
  - Alternative Care: Shifting
    the Care Settings

  - Combination of Oximetry
    and Spirometry

  Reimbursements

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

             Go to Store

                     Toll Free:
(800) 860-OMNI (6664)
               
    Fax:
                (248) 360-9375
                       Email:
  Omni@OmniMedicalSupply.com

 

 
 
 

Home | Customers | Products | Store | Downloads | Contact Us

©2003 Omni Medical Supply, Inc.
1.800.860.OMNI